Cases

HBN-Teknik uses 3D scanning for running-in and quality control of parts

arrow_backTo the overview

08 August 2023 | Zebicon a/s

downloadFor editorial use only

HBN-Teknik A/S in Ringsted develops and produces composite solutions for the trailer and truck industry and is a world leader in plastic bells for air suspension systems and anti-spray screens.

Previously, the company used tactile measuring tools to manually measure parts, but since 2017 they have been using a fully automated 3D scanner solution.

The investment in optical measuring equipment is due to both the higher complexity of parts and customers' increased demands for measurement system analysis, MSA for short.

HBN-Teknik chose to invest in the automated ATOS ScanBox 5120, which can measure parts up to 2 m and 500 kg with high precision.

From development and commissioning to ongoing quality control:
The optical measuring system is currently used for commissioning parts in HBN-Teknik's development department.

In addition to complete surface measurement, the equipment is used to measure center points and concentricity of, for example, the company's bells. Features that are not possible to measure with tactile measuring tools.

The plan is that the ATOS ScanBox 5120 will also be used in production for continuous quality control.

Result:
The MSA of the 3D scanner solution has shown a significantly lower measurement uncertainty than with previous measuring tools. Depending on the part, the measurement uncertainty is reduced between 5-40%.

Læs hele casen her

More articles from Zebicon a/s

C.K. Produktion invests in automated 3D scanning to strengthen documentation, consistency and customer trust
Zebicon a/s

9. July 2025 | Zebicon a/s

C.K. Produktion invests in automated 3D scanning to strengthen documentation, consistency and customer trust

As a plastics manufacturer with around 70 production shifts a week and customers in everything from electronics and wind turbines to signs, measuring instruments and lighting, C.K. Produktion works in

MarineShaft optimizes repairs of complex components with 3D scanning and photogrammetry
Zebicon a/s

9. July 2025 | Zebicon a/s

MarineShaft optimizes repairs of complex components with 3D scanning and photogrammetry

MarineShaft is a leading player in the repair and maintenance of maritime components based in Hirtshals. The company serves a global customer base - including shipyards, ship management companies and

Ammeraal Beltech Modular uses 3D scanning for digitizing and quality control of parts
Zebicon a/s

4. August 2023 | Zebicon a/s

Ammeraal Beltech Modular uses 3D scanning for digitizing and quality control of parts

Ammeraal Beltech Modular A/S is one of the world's leading manufacturers of plastic modular belts and chains for internal transportation. The company's products cater to various industries including a

This case is written by:

Zebicon a/s

Zebicon specializes in 3D scanning and industrial metrology. We offer 3D measurement as a service, which can be used for design and development, documentation, reconstruction, and quality control.

Furthermore, Zebicon is the Danish distributor of optical metrology systems from the German company Carl Zeiss GOM Metrology. With 20 years of experience, we have helped both small and large companies choose the right metrology system based on their challenges, desires, and needs.

Contact Zebicon to explore your options or schedule a demonstration of the systems, if you are considering investin

See profile