Cases

BEARINGS FOR THE WORLD'S LONGEST SUBMERGED TUNNEL

15 September 2023 | AAG Aalborg Gummivarefabrik

AAG has delivered bearings to yet another satisfied customer. In this case AAG has acted technical consultant on options within the requested requirements, which included resistance to heavy loads and horizontal torsion. Together with the customer, we came up with this solution.

The bearings will be used for the Femern Bælt tunnel, which is Denmark's largest infrastructure project and the world's longest submerged tunnel at 18 kilometers. The tunnel reduces the travel time between Denmark and Germany, and will become part of the future's sustainable transport network in Europe.

SILICONE GASKETS CUT ON ONE OF OUR FLASHCUTTERS

A customer requested three different types of gaskets, each with different designs. This task was easily accomplished using our flashcutter.

The gaskets were to be manufactured in silicone, which i

12. June 2023 | AAG Aalborg Gummivarefabrik

SLIDING GUIDES FOR BLADT INDUSTRIES

AAG supplies sustainable sliding guides to Bladt Industries, which produces foundations, transition pieces and transformer stations for offshore wind turbine projects. This shipment of sliding guides

12. June 2023 | AAG Aalborg Gummivarefabrik

MOULDED PLASTIC IN NYLON

At AAG, we offer milling products in rubber, plastic and foam. Our cutters work based on a drawing that we at AAG can produce in our Design & Construction department. With the help of our machine, we

AAG is sending a large delivery of gaskets to Ocean Wind in the USA.

15. September 2023 | AAG Aalborg Gummivarefabrik

AAG is sending a large delivery of gaskets to Ocean Wind in the USA.

AAG is sending a large shipment of gaskets to Ocean Wind in the USA. These gaskets have been developed in collaboration with Ørsted to address a specific issue in the construction of the foundation. O

INFLATABLE GASKETS FOR USE IN SMOKING OVENS

12. June 2023 | AAG Aalborg Gummivarefabrik

INFLATABLE GASKETS FOR USE IN SMOKING OVENS

AAG has delivered inflatable gaskets to yet another satisfied customer who wanted a customized solution.

The inflatable gaskets are going to be used in smoking ovens and are produced in black silic

AAG IS MILLING PLASTIC COMPONENTS FOR ANOTHER OFFSHORE PROJECT

15. September 2023 | AAG Aalborg Gummivarefabrik

AAG IS MILLING PLASTIC COMPONENTS FOR ANOTHER OFFSHORE PROJECT

The finished component, which you see being processed, will be installed on wind turbine foundations. The component is made of PEHD 1000, which has been specifically chosen for this purpose.

At

AAG DELIVERS CUSTOMISED SOLUTION TO SHIP

15. September 2023 | AAG Aalborg Gummivarefabrik

AAG DELIVERS CUSTOMISED SOLUTION TO SHIP

AAG has delivered four moulded rubber blocks for one of our marine customers. The blocks are made of polyurethane (PUR) and each block weighs 48 kg. Each block is unique and made with holes for easier

Molded rubber component approved without any remarks.

15. September 2023 | AAG Aalborg Gummivarefabrik

Molded rubber component approved without any remarks.

AAG has once again produced a product that passes through the testing phase without any comments. During the testing phase, there were high demands for pressure strength, which the product passed with

This case is written by:

AAG Aalborg Gummivarefabrik

AAG | Aalborg Gummivarefabrik A/S is one of Denmark's leading suppliers of technical solutions in rubber, plastic and foam across the industries of wind energy, oil & gas, maritime, transport, construction, manufacturing & machinery industry, electronics, ventilation (HVAC), agriculture, food, medical and health & sport. AAG develops, sells and produces technical products in rubber, plastic and foam and with over 90 years of experience, our innovative and customized solutions gives you more benefits in one solution.

See profile

Cases

BEARINGS FOR THE WORLD'S LONGEST SUBMERGED TUNNEL

More articles from AAG Aalborg Gummivarefabrik